Veer Vibro Screens are designed to perform effective size based separation in coarse as well as fine sizes. These Screens are designed on the principle of Rotating Motion and are one of the most versatile and universally adaptable machines working across spectrum of industries.
Vibro Screens can carry out various duties like;
- Screening of any powder or granules
- Sifting and Grading or classification
removal of oversize/ undersize/ chips/ dust removal from powder/ granules, solid liquid separation/ filtration/ grit removal from slurry, syrup or oils, fiber / husk recovery from liquid stream.
Copyright © 2010, Veer Rotomould. All rights reserved
Design By: VA Webcreative
Vibro Screens
Vibro Screens are used in Industries like
- Agro
- Agro Processing
- Ceramic
- Chemical
- China Clay
- Dehydrated Food
- Dyes and Pigments
- Ferro Alloys
- PVC
- Foundry
- Plastics
- Engineering
- Food & baverages
- Mines and Mineral
- Metal Powder Processing
- Petrochemical
- Paper
- Rotomolding and many more.
Construction:
Vibro Screens are designed on the principle of gyratory motion generated by double eccentric weight mounted on two ends of the shaft of vertically mounted specially designed vibratory motor. The screening assembly consisting of one or more set of Deck/screens is mounted on a set of annularly located springs, effectively isolating the base from vibrating assembly.
The double weight moving with the shafts and located at relative angular position produces three dimensional vibrations which in turn cause the material falling on the screen mesh move at a specific speed in straight to spiral direction giving controlled and effective screening.
Due to the adjustability of weight and the relative angle between them it is possible to make the material move on the screen in desired path to achieve the desired retention time for effective screening before the material gets discharged from the outlet spout. During this process the particles smaller than the mesh aperture fall through the mesh and the oversize material gets discharged from the outlet spout. This process is repeated on the next mesh in case of multi deck screening.
Features & Benefits
- Continuous Feed - Continuous Discharge
- Low Power Consumption (Max. 3 Hp)
- Reduced Environmental Hazards
- No Screen Choking / Clogging
- Savings On Manpower Cost
- Reduction In Material Loss
- Better Pollution Control
- Better Process Control
- Continuous Screening
- Better Product Quality
- Compact And Elegant
- Dust Free Screening
- Low Maintenance
- Easy Openability
- Low Capital Cost
- Modular Design
- Flexible Layout
Our Products
Certificates
Our Vision
VEERKRUPA is committed to provide best Rotomoulding moulds to industries. Beyond all competition in industries, we are set to give an out-standing performance in mould making. Our Mission is to challenge all limits in Rotomoulding and convert all impossibility in to possibilities.
|